Before you ship anything, read the following:

Ice Auger blades must meet certain criteria before they can be sharpened properly. You will just waste your money and our time if you send blades that are beyond repair.

PUL-EEZ! Do not tape your blades!


Bent or Twisted

These blades cannot be secured in the jig properly to ensure the correct angle gets sharpened onto the blade.


Heavily Rusted and/or Pitted

These blades cannot be secured in the jig properly to ensure the correct angle gets sharpened onto the blade.


Cracked

Self explanatory. These blades are destroyed.


Chipped or Gouged

If the chip(s) exceed 1.5mm (1/16in) in depth then the blade is not repairable.


Sharpened on the Bottom

The bottom of the blade is the flat side that touches the ice. This is no-man’s land and must remain absolutely flat. If the bottom of the blade has been sharpened or “touched up” then it is destroyed and there is no recovery.

Wondering how much it's going to cost? Check out the price sheet.


How to contact me

Shipping Address
240 Davidson Street
Winnipeg, MB, R3J 2T6

Business Hours
Mon - Fri - 9AM - 5PM
Sat & Sun - (Closed)

Email:
gord@thehandofgord.ca

Telephone
204-797-7647


Connect with me on: